The Micro Ripper - Micro-Dosing Ball Vape Kit
The full Micro Ripper Kit.
The Micro Ripper is a micro-dosing ball vape kit, designed for those who believe that less is often more. While our standard kits are built for massive hits, the Micro Ripper focuses that same raw thermal energy into a smaller, more efficient device. It is the most accessible and affordable ball vape in the Ripper range, designed specifically for users who want “end-game” convection performance, while only using small quantities of material.
The Ripper kit’s glass bowl is suitable for holding up to 0.2g. If you want to use over 0.2g, please see our other ball vape kits which are compatible with larger bowls.
Maximum Efficiency, Minimal Waste
At the heart of the Micro Ripper is a machined titanium heater head powered by a 16mm barrel coil. This smaller diameter concentrates the heat, allowing for thorough, edge-to-edge extraction of doses up to 0.2g. Whether you are looking to stretch your stash further or simply prefer a more controlled, flavour-forward experience, the Micro Ripper delivers dense, milky clouds from even the smallest pinch of herb.
🔬 Micro-Dosing Power Meets Dry Glass Flavour
The Micro Ripper proves that you don’t need a massive bowl size to experience true ball vape performance. Engineered specifically for delivering 100% total thermal extraction with minimal material.
The Dry Glass Technique
While most ball vape users run their gear through a water-filled bubbler, the Micro Ripper excels when paired with a dry glass piece (no water). Because the 16mm heater head delivers smooth, controlled convection airflow, drawing through dry glass preserves the volatile terpene profiles that water filtration can sometimes wash out.
“Absolute game changer once you learn little things like balancing draw speed injector position and temp settings you can produce flavourful clouds like never before. It’s even better through a dry piece of glassware (honestly just try). Buy a ball vape you will not regret it.” See review
— Ian (Verified Buyer)
Why the Micro Ripper Excels:
- Maximum Efficiency: Extract 100% of your active terpenes from bowls as small as 0.05g to 0.2g.
- Pure Terpene Profiles: Ideal for dry glass sessions where uncompromised flavour is your primary goal.
- Instant Recovery: The compact 16mm ruby chamber heats up quickly and maintains stable temperatures throughout your draw.
Ready to Rip, Out of the Box
Like all our kits, the Micro Ripper arrives fully assembled and ready to go. Simply plug it in, set your temperature, and you are ready to experience micro-dosing like never before!
Quick Start Guide
- Placement: Place the stainless steel stand on a flat surface, and dock the Micro Ripper head. Insert the coil into the PID box, and then plug in the power.
- Burn-Off: Switch on the PID and set to 315°C. Allow the unit to sit for 15 minutes to clear any manufacturing residue.
- The Sweet Spot: For micro-dosing, we recommend starting between 290°C and 300°C.
- Loading: Place a small amount of material (up to 0.2g) into the 14mm glass bowl.
- Inhale: Place the 14mm injector head into the bowl and take a long, steady draw.
Package Contents
- 1x Micro Ripper Heater Head: Titanium with 14mm injector connection (Pre-Filled with 100x 3mm Ruby Balls).
- 1x 16mm Barrel Coil: Precision heating element (Pre-installed).
- 1x Wooden Handle: Ergonomic and heat-resistant (Pre-installed).
- 1x Digital PID Controller: UK-spec power supply with Celsius display and ‘live temperature’.
- 1x Glass Micro-Dose Bowl: 14mm female connection (Fits up to 0.2g).
- 1x 18mm to 14mm Glass Reducer
- 1x Stainless Steel Heat Stand: Secure docking for your heater head.
- 10x Replacement Basket Screens: For long-term bowl maintenance.
- 1x UK Power Plug
- 1x Travel Case
Ready to dial in your micro-dosing setup? The Micro Ripper arrives fully assembled in-house, pre-filled with rubies, and pre-set to UK standards—plug in, dial in your draw speed, and enjoy pure flavour.
Note: This is a powerful desktop kit designed to be used with a separate glass water piece (often called a ‘bubbler’, ‘bong’ or ‘rig’) to cool and filter the potent vapour. This is not included, please see our glass bubblers if you need one to pair with your kit.
Always use the provided heat stand to place the heater on when not in use.
⚠️ SAFETY & DISCLAIMER
EXTREME HEAT: The Micro Ripper can operate at temperatures exceeding 350°C. The heater head, rubies, and metal housing remain extremely hot for a significant time after use. Always dock the heater on the heat stand provided. Keep away from flammable surfaces, children, and pets.
We Don't Match Prices. We Dictate Them.
Proudly setting the standard for UK ball vapes and hybrid desktop stations.
Found a "like-for-like" product cheaper elsewhere in the UK? Don’t settle for inferior quality just to save a few quid. We refuse to be beaten on price, and an imitation can never match the true authentic Ripping Terps experience.
Submit the offender's link via our quick verification form. Once approved, we will instantly drop an exclusive discount code into your inbox so you can own a genuine Ripping Terps powerhouse.
Open Price Verification
Ian D. (verified owner) –
Absolute game changer once you learn little things like balancing draw speed injector position and temp settings you can produce flavourful clouds like never before.
It’s even better through a dry piece of glassware (honestly just try).
Buy a ball vape you will not regret it.