Standard 16mm E-nail Coil

16mm Barrel Coil For Ball Vapes

The 16mm Barrel Coil is designed to provide rapid heat-up times and rock-solid temperature stability. By utilising a smaller diameter, this coil concentrates thermal energy into a tighter area, making it the essential heating element for the Micro Ripper Titanium Head and other 16mm injector systems.

Choose Your Fit: Standard or Pre-Stretched

A perfect fit is the key to efficient convection. We offer this coil in two configurations via the dropdown menu:

• Pre-Stretched (Recommended for Micro Ripper Users): If you are purchasing this as a replacement or upgrade for your Micro Ripper, choose this option. We will professionally stretch the coil to match the exact vertical height of our titanium head. This ensures maximum surface contact and the most accurate temperature readings.
• Standard Coil: Select this option if you are a DIY enthusiast building a custom kit or using a third-party heater head and prefer to perform your own custom fitment.

Technical Specifications:

• Coil Type: 16mm Barrel Coil.
• Voltage: 220V–240V (UK/EU Standard).
• Connector: XLR 5-Pin (Standard Wiring).
• Connector: XLR 5-Pin (Standard Wiring – See Below for Compatibility).
• Cable: Durable Braided sleeve.

PID Controller Compatibility

To use this coil you must have a compatible PID (Proportional-Integral-Derivative) controller. Our hardware is designed to work with the most common industry standards.

• Wiring Standard: Our coils use the industry-standard XLR 5-Pin configuration. The coil uses the same wiring format used by Auber, Cannabis Hardware, and many other premium desktop units.
• Pin-Out Configuration:
  • Pin 1: Coil +
  • Pin 2: Coil –
  • Pin 3: TC +
  • Pin 4: TC –
  • Pin 5: Ground
• Safety Check: If you are unsure of your PID’s wiring, please consult your manufacturer’s manual. Plugging a coil into an incorrectly wired PID can cause permanent damage to the coil or the controller.

Fitment Advice:

This coil is designed specifically for 16mm heater heads. It is not compatible with our 20mm or 25mm systems. Please ensure your PID controller is calibrated for UK voltage and follows the standard 5-pin configuration before use.

What’s Included?

• 1x 16mm Barrel Coil with Braided Cable (Standard or Pre-Stretched as selected).

Note: This is the heating coil only. PID controller, heater head, and handle are all sold separately.